Planned Maintenance calls are proven to keep your system running with long term savings. A recent independent survey in the US showed that poor maintenance is the single biggest reason why many heating and air conditioning units fail to reach their design life. In a separate study, an individual studied 563 service calls from people with broken down systems and discovered that 324 of the calls could have been avoided if the equipment was properly maintained by having systematic maintenance calls through out the year. It is estimated that having an 'Energy Saving Agreement' (ESA) will result in

a 10%-20% saving in one's electricity bill. The level of saving depends on the age and quality of your equipment.

Energy Saving Agreement:

---

Having an Energy Saving Agreement will:

• reduce your electrical consumption
• maintain equipment to high standards in accordance with manufacturers guidelines
• maintain reports for the Environmental Health Officer to say that your equipment is in good working order - This report will also outline what parts are required to keep your equipment in optimum working order
• will reduce the number of emergency breakdowns during peak times
• contract customers get priority on service calls and 15% discount on parts
• gives an opportunity to pre-empt equipment failures and hence budget accordingly

Remember a small problem that is not repaired can result in major problems.

We offer two different Energy Saving Agreements:

Standard Energy Saving Agreement:
This entitles you to a specific number of routine maintenance visits (usually two) to your equipment per year.

Energy Saving plus Comprehensive Labour Agreement:
This entitles you to the regular number of routine maintenance calls as agreed in the contract. The contract holder is also entitled to all labour charges on any service call outs through out the contract period.

Routine Maintenance
Air Conditioning Units:	Clean coil and filters, check and clean drain pipe, carry out leak tests on all mechanical joints, clean indoor and outdoor units, check evaporator and any other checks that may be necessary to ensure the correct working order of the unit.
Refrigeration Units:	Check cabinet for damage, check lights, door seals, fan belt, condenser, air flow, coil, temperature, clean all items, check all insulation and any other checks that may be required to specific units.

If you would like a no obligation ESA quotation for your equipment please call our Service and Maintenance Manager John Kelly on 065 6820997 or Contact Us.